This is it, the final step of creating the Quilt to Give. Bind your creation and add a label, then you’ll be ready to give it away.

Now for the final step: Bind and Label Your Quilt

Note: Samples for the binding steps were made from contrasting fabrics. The photos are not from a completed quilt.

1. Prepare binding strips.

Twin:

Cut eight 2-1/2″ crosswise strips. (5/8 yd.)

Double:

Cut nine 2-1/2″ crosswise strips. (3/4 yd.)

Queen:

Cut ten 2-1/2″ crosswise strips. (3/4 yd.)

King:

Cut ten 2-1/2″ crosswise strips. (3/4 yd.)

•      Stitch short ends of the binding strips, right sides together. Press seams open.

•      Cut one end of the binding at a 45° angle. Fold in 1/4″ at trimmed end.

•      Press a 1/4″ strip of paper-backed fusible web to the folded-under edge of the binding. Leave paper backing attached.

•      Fold binding in half lengthwise, wrong sides together. Press.

2.  Attach binding to the quilt.

•      Meet the binding to the right side of the quilt, starting with the angle-cut end in the center of one side. Stitch binding to quilt with a 1/4″ seam, beginning 4″ from the end of the binding.

•      Prior to reaching the corner, fold the binding at a right angle. Press mark the fold.

•      Continue stitching, stopping at the press mark. Lock the stitch, raise the presser foot, and clip the threads.

•      Refold the binding at the 45° angle, aligning cut edge of binding with cut edge of the quilt.

•      Fold the binding down, meeting binding fold to top edge of quilt and binding cut edge to side edges. Stitch a 1/4″ seam, starting at the folded edge.

•      Repeat the process at the remaining corners.

3. Join binding ends.

•      Remove the paper backing from the folded-under edge of the binding.

•      Insert free end of binding inside beginning of binding so binding is smooth. Unfold binding and trim off excess length.

•      Stitch remainder of binding seam.

•      Press the newly created seam.

4. Fold and press binding away from the quilt. Then fold binding to the wrong side, covering the stitching line and tucking in corners to form miters. Hold binding in place with Wonder Clips or pins.

5. Secure edge of binding by stitching in the ditch from the right side, sewing in the well of the seam through all layers to catch the folded edge on the back of the quilt. Or, hand stitch folded edge in place.

 

Sharen's happy to be at the final stage of attaching the binding!

Label your quilt

Your finished quilt deserves a label. Embroider or print a message on fabric; attach to the back of the quilt.

 

Ta Da! You’re finished. 


Nancy Zieman Quilt to Give



Thank you for following along with the 10 steps. It’s been a pleasant journey with a rewarding end result.

Here’s a review of the links for all the steps:

Step 1—Sort out fabrics from several stashes

Step 2—Cut column strips and center patchy strips 

Step 3—Stitch column lengths

Step 4—Stitch the patchy center columns

Step 5—Create the columns

Step 6—Piece the quilt top

Step 7—Audition borders

Step 8—Add borders

Step 9—Layer and quilt your creation

Step 10—Binding and labeling

Quilt for Others with “Quilt to Give” Learn how to set-up and organize a Quilt to Give Event.

When you make a Quilt to Give, be sure to post photos of your progress and finished quilt at the Sew Along with Nancy Zieman flickr site or on my Facebook page.

The gift is in the giving!

Nancy Zieman The Blog

Content in this feed is © copyright 2013 by Nancy Zieman and may not be republished without written permission. You’re welcome to forward the email to a friend or colleague but it’s not okay to add the RSS feed automatically as content on a blog or other website.
image_pdf